The hydraulic veneer peeler is the main equipment for veneer manufacturing, which greatly improves the productivity of wood. In daily use, we should pay more attention to the maintenance of the machine and avoid declaring unsafe. Here are some tips:
1. The gears must be properly lubricated to increase the durability of the machine.
2. Check all instruments, limit switches and limit stop installation conditions, and make sure everything is normal.
3. The machine tool accessories should be carried out regularly before starting; ensure that the indicating instrument and motor are in operation after activation; make the machine run smoothly, with low noise and long life, and should be alert to abnormal vibration and equipment noise.
4. First of all, we must remove the big knots in the wood, reduce the amount of feed and adjust the speed of the machine. When we rotate and cut the big knots, it will weaken the vibration of the knife holder.
5. Minimize the use of large wood peeling machines to remove rough wood and small-diameter peeling to avoid wear and mechanical damage.
6. Clean the machine after get off work, wipe cotton cloth and sawdust with a knife, pressure gauge, screws, and all parts of the axle to prevent corrosion.
In order to maintain efficiency, the machine needs regular maintenance (inspection, repair, overhaul), and timely replacement of worn or damaged feed screws, nuts, carding machine shafts and sleeves. Remove dust and small debris in time.