Category Archives: Plywood Machinery

The CNC veneer peeling machine is the main equipment for producing plywood. It is a peeling machine without a mechanical drive shaft.

It is a kind of non-spindle mechanical transmission equipment, mainly CNC single-board CNC peeling machine, mainly composed of frame, double roller system, single roller system, tool post, transmission system and electrical system.

Therefore, as a spindleless mechanical transmission equipment, the spindleless CNC thin plate peeling machine can meet the requirements of high-precision wear-resistant alloy gear transmission, and has the characteristics of durability. The product uses a computer system, which can run automatically and is easy to operate. It is suitable for stripping traces of heartwood by mandrel peeler and wood ring. Residual clover, maple, pine, birch, miscellaneous wood, pruned logs or heartwood are usually used as raw materials for spindle debarkers. Our production specialty is small wood configuration, economical, easy to operate and environmentally friendly.

The advantages of the spindle peeling machine: uniform veneer thickness, smooth surface, reasonable structure, convenient operation and maintenance, fewer wearing parts, long service life, and less wood resources. Rich and well preserved.

We are earlier professional manufacturer of CNC veneer peeling machines with strong technical force, stable performance, compact structure, simple operation and high production efficiency.

We specialize in the production of 1.3m, 2.6m vertical and horizontal types, and are equipped with spindles, spindles, wooden shafts and other veneer peeling machines and presses. With advanced equipment and technology, scientific management and quality control system, we have won a good reputation among global customers.

Regular cleaning of the veneer peeler is a very important operation to ensure the efficient operation and service life of the machine. Many people think that it is not necessary to spend a lot of time cleaning the machine, but long-term accumulation of dust will corrode or even block the parts of the debarker, causing economic losses.

1. Therefore, in order to facilitate the next use, the machine table should be cleaned in time.

2. In order to make the machine run smoothly and avoid midway failures, the wood chips in and around the rolling track should be cleaned up in time.

3. The combing screw is the most important equipment. It will affect the accuracy of the machine and play a key role in the operation. Therefore, it is necessary to clean the feces and armor required for the combing screw regularly and correctly.

4. If you find that dust or dirt accumulates on the circuit board, which makes the circuit board unable to work normally, you can decide to clean the control box.

The hydraulic veneer peeler is the main equipment for veneer manufacturing, which greatly improves the productivity of wood. In daily use, we should pay more attention to the maintenance of the machine and avoid declaring unsafe. Here are some tips:

1. The gears must be properly lubricated to increase the durability of the machine.

2. Check all instruments, limit switches and limit stop installation conditions, and make sure everything is normal.

3. The machine tool accessories should be carried out regularly before starting; ensure that the indicating instrument and motor are in operation after activation; make the machine run smoothly, with low noise and long life, and should be alert to abnormal vibration and equipment noise.

4. First of all, we must remove the big knots in the wood, reduce the amount of feed and adjust the speed of the machine. When we rotate and cut the big knots, it will weaken the vibration of the knife holder.

5. Minimize the use of large wood peeling machines to remove rough wood and small-diameter peeling to avoid wear and mechanical damage.

6. Clean the machine after get off work, wipe cotton cloth and sawdust with a knife, pressure gauge, screws, and all parts of the axle to prevent corrosion.

In order to maintain efficiency, the machine needs regular maintenance (inspection, repair, overhaul), and timely replacement of worn or damaged feed screws, nuts, carding machine shafts and sleeves. Remove dust and small debris in time.

Breath/Hot press type veneer dryer is very popular in Southeast Asia market.
Compared with Veneer mesh/roller dryer, it is more economic and less space required, very fit for small factory.
Also, the planeness is better.
Whlie if you need large drying capacity, you have to choose veneer roller dryer.

Finger jointing is known as the most stable method of wood length joints.
Finger joint shaper and assembler machine are very popular in furniture factories.
Manual, Semi-automaic and Automatic, many series can be choosen according to your requirements.