The classification of plywood machines mainly depends on the production process of plywood.
The main machines and functions are as follows:
1. The log debarking machine can debark logs and logs, making irregular logs suitable for veneer debarking.
2. Veneer peeling machine is an important plywood machine, used to produce plywood core veneer and surface veneer. Spindleless veneer peeling machine is suitable for wood with a diameter less than 600mm. Our spindleless veneer peeler can peel both softwood and hardwood.
3. The veneer dryer is used to remove the moisture of the veneer, and the moisture of the fresh veneer is greater than 50%. The moisture content can be less than 10% only after drying, which is very suitable for making plywood. The veneer dryer has a tubular veneer dryer. 4. Dryer, hot pressing veneer dryer and continuous veneer dryer. Different models have different drying capabilities.
4. The core veneer building machine is used to connect 4 * 4 or 4 * 3ft veneers into 4 * 8ft veneers. The core veneer construction machine has two models. One is a 4-foot core veneer construction machine, the direction of the veneer entering the machine is vertical (4 feet long side). The other is an 8-foot core veneer construction machine, and the direction of the veneer into the machine is horizontal (8 feet long side).
5. Plywood paving line, used to pave veneer into plywood. It is the core platform for veneer paving. The use of plywood paver saves the number of craftsmen and increases production capacity.
6. The glue spreading machine is used to spread glue on veneer and plywood on average. The gluing machine has three rollers and four rollers. The gluing machine is divided into a single-sided gluing machine and a double-sided gluing machine. Mainly used for core veneer, multilayer plywood, blockboard, etc.
7. Cold press is an essential production process. The plywood cold press can make each veneer stick together. This process can make the plywood of the mat strong and flat.
8. The hot press is used: after the plywood passes through the cold press. Before pre-pressing, the specific board should be put into the pressing board of the plywood hot press. A specific board will experience the pressure and high temperature provided by the hot press board before a new board will appear. The plywood hot press can be customized according to customer requirements.
9. The sanding machine can sand wood boards such as medium density fiberboard, plywood, hot pad plywood, LVL board, floor, door panel, WPC board and so on. The sanding machine has calibration sanding machine and polishing sanding machine.
10. The cutting edge saw machine is an important plywood machine. Used for sawing the four end faces of plywood to obtain accurate plywood size.