Category Archives: Product Knowledge

Our Door production line can provide the best solution for Door factories,furniture manufactures etc.Our solution can solve the problems in solid door,composite door,PVC wood doors etc.

We have the best Sliding table saw for timber/MDF cutting,automatic edge banding machine achieves a perfect edge banding performance.

Door lock mortising machine can make lock hole in one time.

The hot pressing machine and cold press machine has the best pressing performance.

According to big or small and medium furniture factories,we have multi-choice for our customers,to achieve the best value.

Double veneer hot press machine is the main product in our company, which is widely used in the pressing industry of furniture board, floor board, cabinet board, door board and so on. It has the advantages of fast pressing speed, high efficiency, and laborsaving and so on. Standard double veneer hot press machine is equipped with auto feeding trolley, which is convenient for worker’s operating.

Our short cycle pressing machine has the following features,

1.  Aging Treatment:  After we finish welding of the main frame of the press machine, we give them a aging treatment. After this step, the stresses of the main frame became more uniform and the using life of the frame can be 1.5-2 times more than before.

2. Frame Mechanism: Some other brand press machine internal stress concentration region was grinded by artificially after cutting, edge stress concentration easily damaged, but we use CNC machining center creates the shape make a very smooth surface. This would increased strength and fatigue life, make the frame more persistent. 

3. Insulation Mat :The machine uses macromolecule inner temperature insulation board instead of epoxy resin plate, so that the index of withstand voltage and heat-resisting is increasing obviously. It would reduce the temperature of the oil cylinder,  to extend the service life of the sealing ring of the cylinder.

Prolifiktrading is specilized in veneer peeling machine, supplies a wide range of machines for peeling, including Spindless and Spindle peeling lathe. Over the past few years, we have taken steps to improve peeling lathe by providing the lastest technology, excellent customer service and after-sale support. We are aiming to fit into all customers’ needs, from small production capacity with simple lines to fully automated large production capacity lines.
Choose a suitable veneer peeling machine can not only save the cost of production, but also help you produce good quality veneer at high production rates.

Some important parameters should be taken into account:
1.Veneer thickness–Normally, the Spindless rotary peeling lathe with veneer thicknees range 0.8-3.0mm can meet the requirement of producing core board. While if for surface veneer, you’d better choose spindle peeling lathe.
2.Max. rotary cutting length–Choos a cutting length according to your log length.
3.Max. rotary cutting diamater— When you decide a model of peeling lathe, do not forget to check whether the diamater can fit your core.
4.Peeling speed–This parameter can help you to judge the output of the veneer. And if it will be used for a production line, you also have to refer to the speed of clipper and stacker.

Besides above, the electric control system, guide screw, guide rail and knife setting system will certainly impact the performance, as well as the price.
If any query when choosing a veneer peeling machine, you can contact us for help.